90° Peel Fixture for FP-2260
This 90° Peel Fixture is designed for use on the FP-2260 Friction/Peel Tester. The fixture is used to add the ability to evaluate 90 degree peel tests for the peel adhesion.
- Sample Type: Flexible adhesive material
- This fixture utilizes a moving sample table to maintain a 90° angle while measuring peel force. The adhesive sample is attached to the plate while the opposite end is secured by the moving crosshead using a clamp.
Application: Peel fixtures
Caractéristique: Adhesion
Produits connexes
![T Peel](https://www.rycobel.com/assets/uploads/site/products/t-peel-fixture-for-fp-2260/_767xAUTO_fit_center-center_80_none/TPeel.jpg)
T-Peel Fixture for FP-2260
Application: peel fixtures
Caractéristique: adhesion
![Seal Strength FP](https://www.rycobel.com/assets/uploads/site/products/seal-strength-fixture-for-fp-2260/_767xAUTO_fit_center-center_80_none/Seal-Strength-FP.jpg)
Seal Strength Fixture for FP-2260
Application: peel fixtures
Caractéristique: adhesion, résistance de scellages
![Fp2255 Cof](https://www.rycobel.com/assets/uploads/site/products/friction-peel-tester-reibungsprüfgerät/_767xAUTO_fit_center-center_80_none/FP2255_COF_2022-01-25-140129_lntq.jpg)
Testeur friction/pelage - coefficient de frottement(COF)
Application: papier & pâte, carton
Caractéristique: adhesion, coefficient de frottement - cof - friction, résistance de scellages
Plus d'info?
Vous avez une question ? N'hésitez pas à nous contacter.